1 °) Demonstrate the pump:- Remove the protection of the tank, to access it and to the white plastic support with tabs under which the pump is located.- Lift the tabs and extract the white support.- Disconnect the pump and pull gently on it to separate it from white support. 2 °) Install the pump:- Place the new pump on the white support by putting pressure as much as possible so that it is well fixed and that it does not fall by itself.- Connect the electric part of the pump to white support and place it again on the tank by fixing it using the tabs .- Finally, cover the tank with its protection. 4 °) Connect the diagnostic device: Finally, activate the "tank substitution" process for correct priming of the pump. At one point, the computer will ask you to wait about 15 minutes, which is n.
